h1

Fluid Drive Upgrades

April 25, 2017

TRI has new tilt pad bearing designs for upgrades to the Size 270 Dual Circuit Fluid Drive. These bearings replace fixed bore pressure dam bearings and are essential for vibration control under high torque conditions.

The image below replace the bearing and the bearing housing on the output-outboard end of the fluid drive. It’s a 6 pad bearing with 2 thermocouples in the bottom pad and vibrations probes at 45┬░ off of the vertical center-line.

Size270DCFD-OPOB-640x640

The image below in the inboard bearing housing. This housing holds the pads for both the input-inboard bearing and the output-inboard bearing.

Size270DCFD-IB-640x640

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: